Comments on: How to inspect and replace rear bushes on Volvo 240 and 260 http://www.volvohowto.com/how-to-inspect-and-replace-rear-bushes-on-volvo-240-and-260/ The Volvo Repair Tutorials Source Thu, 21 Jul 2016 13:31:56 +0000 hourly 1 https://wordpress.org/?v=6.4.3 By: Scott http://www.volvohowto.com/how-to-inspect-and-replace-rear-bushes-on-volvo-240-and-260/#comment-2029 Thu, 21 Jul 2016 13:31:56 +0000 http://www.volvohowto.com/?p=657#comment-2029 Thank you very much for posting this guide. Very good info here.

]]> By: Mick http://www.volvohowto.com/how-to-inspect-and-replace-rear-bushes-on-volvo-240-and-260/#comment-1930 Sun, 17 Jan 2016 10:21:18 +0000 http://www.volvohowto.com/?p=657#comment-1930 Hi and thanks for the bush replacement write-up.

I am about to do mine.
1989 Volvo240 non-turbo.
I am using Super Pro bushes for the rear and standard Meyer bushes on the front (rubbber).

Are you able to tell me the inner diameter of the torsion arm slot for the bushes?
And similarly, for the panhard rod.

The reason is that if I can get used spanner sockets that have the correct diameter then I will be able to use a press to remove the old and insert the new bushes.

Any advice would be helpful!
Thank you.
Mick

]]>